Specifications

Table 1. Service Processor Checkpoints (continued)
Checkpoint Description Action/ Possible Failing FRU
9082 I2C/SPCN VPD data collection See note 1 on page 84
9083 End SC VPD data collection See note 1 on page 84
9084 End I2C VPD data collection See note 1 on page 84
90FD Waiting for IBIST to complete See note 1 on page 84
9101 Create CEC box See note 1 on page 84
9102 Open load source See note 1 on page 84
9103 Verify open status of load source See note 1 on page 84
9104 Load IPL LIDs See note 1 on page 84
9105 System flush See note 1 on page 84
9106 Scan interface BATs See note 1 on page 84
9107 ABIST See note 1 on page 84
9108 LBIST See note 1 on page 84
9109 LBIST See note 1 on page 84
910A Configure and initialize processors See note 1 on page 84
910B Configure main storage (system
memory)
See note 1 on page 84
910C Initialize main storage (system
memory)
See note 1 on page 84
910D Configure and initialize I/O See note 1 on page 84
910E Test main storage (system
memory)
See note 1 on page 84
910F Free IPL LIDS See note 1 on page 84
9110 Load runtime LIDS See note 1 on page 84
9111 Load dump LIDS See note 1 on page 84
9112 Enable attention See note 1 on page 84
9113 Enable function 22 See note 1 on page 84
9114 Load IPL ROS See note 1 on page 84
9115 Load system data areas
(NACA/PACA)
See note 1 on page 84
9116 Start IPL ROS execution See note 1 on page 84
9118 Waiting for VPD collection to
complete
See note 1 on page 84
Chapter 4. Checkpoints
81