Installation guide

8. Refer to Figure 31.
9. Ensure that the Power light 2 and the Receive light 1 of every optical extender
are on.
If all the lights are on, go to step 10.
If any light is off, go to “MAP 2330: 7133–Optical Extender” in the 7133 Models
D40 and T40 Serial Disk Systems: Service Guide if you are qualified technically to
do so. Otherwise, call your service representative.
10. If you have done the previous steps as part of the initial installation of the
complete system, return to the system installation instructions.
Part Number nnnnnnn
Class 1 Laser Product
FCC Class A - See Manual
1
1
2
2
Part Number nnnnnnn
Class 1 Laser Product
FCC Class A - See Manual
Figure 31. Checking the Lights on an Optical Extender
54 7133 Model T40 Installation Guide
|
|
|
|
|
|