Installation guide

8. Repeat step 7 for all the multi-mode conditioners that are installed on the SSA
adapter.
9. Ensure that all fibre optic cables are correctly connected.
10. Attention: Excessive movement at connections in a fibre optic link might cause
link errors.
Ensure that the fibre optic cables are held tightly by cable ties to prevent strain
and movement at the optical extenders.
11. If not already done, put the wrap cable and adapter assembly into its plastic bag,
and put the bag into a safe place that is as close to the optical extender as
possible.
12. If you are also connecting SSA cables, but have not done so yet, go to
“Connecting SSA Cables to the SSA Adapter” on page 45. Otherwise, go to
“Checking Whether a Remote-Power-On-Control Unit is Present” on page 19.
52 7133 Model T40 Installation Guide
|
|
|
|
|
|
|