Installation guide

Connecting to the Using System
1. If the SSA adapter has not yet been installed into the using system, install it now
(see the user or maintenance information for your using-system).
For information about the various types of SSA adapter, see the User’s Guide and
Maintenance Information manual for your SSA adapter.
2. Check whether the AIX
®
system has support for 7133 Models D40 and T40
installed. On the command line, type:
lsdev -P -s ssa
The information that is displayed contains a reference to the SSA enclosure if the
correct support has been installed.
If SSA support has been installed, go to “Connecting SSA Cables to the SSA
Adapter” on page 45.
If the support has not been installed, ask the customer to install the relevant
software support. (Your Software Support Center can help you to identify the correct
software.) Then go to “Connecting SSA Cables to the SSA Adapter” on page 45.
44 7133 Model T40 Installation Guide