Installation guide

9. Refer to Figure 14.
10. Plug the power cable into a mainline electrical power outlet. If the power outlet has
a switch, switch it on.
11. Check whether the 7133 Power light 1 comes on.
If it comes on, go to step 15 on page 24.
If it does not come on go to:
v Step 12 if the 7133 has a remote-power-on control unit.
v Step 13 if the 7133 does not have a remote-power-on control unit.
12. Ensure that you have set the power switch of the remote-power-on control unit
to | (on). If the 7133 Power light comes on, go to step 15 on page 24.
If it still does not come on, go to step 13.
13. Press and release the 7133 power switch 3.
1
2
3
4
5
6
Figure 14. Checking the Lights
Installing and Testing the 7133 Model T40 23