Installation guide

Before You Install the 7133 Model T40
This section describes the jobs that should be done and safety items that should be
considered before you start to install a 7133 Model T40.
v Locating the mainline electrical power outlets
v Checking mainline electrical power outlets
v Locating the 7133 Model T40
v Operating temperature
v Providing the necessary service clearances.
Locating Mainline Electrical Power Outlets
For pluggable equipment, the mainline electrical power outlets must be installed near
the equipment and must be easily accessible. Ensure that suitable outlets are available
where the 7133 Model T40 is to be located.
Installation Safety Notice
DANGER
An electrical outlet that is not correctly wired could place hazardous voltage
on metal parts of the system or the devices that attach to that system. It is the
customers’s responsibility to ensure that the outlet is correctly wired and
grounded to prevent an electrical shock.
During an electrical storm, do not disconnect cables for display stations,
printers, telephones, or station protectors for communication lines.
CAUTION:
This product is equipped with a 3-wire power cable and plug for the user’s safety.
Use this power cable in conjunction with a correctly grounded electrical outlet to
avoid electrical shock.
2 7133 Model T40 Installation Guide