Installation guide

Laser Safety Information
Notes:
1. The information given here applies only to 7133s that have the Advanced SSA
Optical Extender (Pair) feature.
2. The Advanced SSA Optical Extender, referred to in this information as an optical
extender, is part of the serial optic channel converter assembly.
This system contains a laser product called the optical extender. In the United States,
the optical extender is certified as a Class 1 laser product that conforms to the
requirements contained in the Department of Health and Human Services (DHHS)
regulation 21 CFR Subchapter J. Internationally, the optical extender is certified as a
Class 1 laser product that conforms to the requirements contained in the International
Electrotechnical Commission (IEC) standard 825-1 (1993).
Class 1 laser products are not considered to be hazardous. The optical extender
internally contains an indium gallium arsenide / indium phosphide (InGaAs/InP)
semiconductor laser diode emitting in the wavelength range of 1280 to 1340
nanometers. This laser diode is a Class 1 laser that is rated at 5.0 milliwatts. The
design of the optical extender is such that access to laser radiation above a Class 1
level during operation, user maintenance, or service conditions is prevented.
Part Number nnnnnnn
Class 1 Laser Product
FCC Class A - See Manual
CLASS 1 LASER PRODUCT
APPAREIL A LASER DE CLASSE 1
LUOKAN 1 LASERLAITE
TO IEC 825-1:1993
x 7133 Model T40 Installation Guide
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|