User's Manual

VLAN Tab
This setup lets you create virtual local network connection through the device Ethernet only and
over wireless connections.
By default VLAN mode is disabled and checked on No Vlan
VLAN Switch
To setup VLAN network check on Vlan Switch
To add a Tag VLAN ID for Ethernet port, type in the ID number select Tag and click Add
To add a Tag VLAN ID for MAIN wireless SSID, type in the ID number select Tag and click Add
To add a Tag VLAN ID for VAP1 wireless SSID, type in the ID number select Tag and click Add
To add a Tag VLAN ID for VAP2 wireless SSID, type in the ID number select Tag and click Add
To add a Tag VLAN ID for VAP3 wireless SSID, type in the ID number select Tag and click Add
*** Warning: Adding a Tag VLAN ID to device interface port can cause lost of connection to
device web manager if the PC ethernet port or wireless connection do not have a
Tag VLAN ID or do not have the same Tag VLAN ID setup in device.
If this happened, use the device Reset button to clear the config and reconfigure.
Refer Reset button operations section.
Similarly, to add an untag VLAN ID enter the ID number and select Untag and click Add
Refer to Appendix V for VLAN setup examples.