User's Manual

Station Connection Info
Status Info
Click to refresh client connection statistics and status page.
WLAN Connected Status:
MAC Address: displays the MAC address of the current active WLAN card.
Signal Strength: displays the received wireless signal level of opposite connected device.
TX Rate and RX Rate: displays the current 802.11 data transmission (TX) and data reception
(RX) rate while operating in Station mode. Typically, the higher the signal, the higher the
data rate and consequently the higher the data throughput.
Channel Width: HT20 indicates established connection is 20MHz channel width
HT40+ indicates established connection is 40MHz channel width
WLAN Local AP Statistics:
Bytes transmitted/received value represents the total amount of data (in bytes) transmitted
and received during the connection;
WLAN Local AP Errors: section displays the counters of 802.11 specific errors which were
registered on wireless interface: