User's Manual

S
S
t
t
e
e
p
p
3
3
:
:
Connect the power adapter supplied with PoE+ to the main
electrical supply and the power plug into the socket of the injector.
Note:
The voltage and current supplied to the power adapter and the
PoE+ power adapter are different. Do not interchange the power
adapters.
S
S
t
t
e
e
p
p
4
4
:
:
Turn on your power supply. Notice that the Power LED has lighted
up. This indicates that the access point is receiving power through
PoE+. Notice also that the corresponding port LEDs have lighted up.
This indicates that connection between your access point and your
PC has been established.