User's Manual

Using PoE+ to power up the device
The access point is fully compatible with PoE+. This accessory supplies operational
power to the wireless AP via the Ethernet cable connection.
Users who have already purchased PoE+ and who wish to use it to supply power
to the access point may follow the installation procedures shown below:
S
S
t
t
e
e
p
p
1
1
:
:
Use an RJ45 Ethernet cable to connect one end of the cable to the
LAN OUT port of PoE+ and the other end to Ethernet port of the
access point.
S
S
t
t
e
e
p
p
2
2
:
:
Next, connect the RJ45 Ethernet cable attached to PoE+ to your
PC’s Ethernet network adapter.
Once you have finished configuring your access point, you can
connect the PoE+’s RJ45 Ethernet cable to your network device,
such as to a switch or hub.