User's Manual

Chapter 7 Types of Authentication and Encryption mode
50
2. Choose LEAP from the drop-down menu and click on the
Configure… button.
3. You may set your username and password to:
- Use Temporary User Name and Password
Each time your PC reboots, you will be require to enter
your LEAP username and password in order to be
authenticated and obtain access to the network.
- Use Saved User Name and Password.
Authentication is obtained using a saved username and
password (registered with the server) so you will not be
require to enter your LEAP username and password each
time your PC reboots.
Temporary User Name and Password
1. The login page will pop up as shown below. Fill up the
respective fields and click on the OK button twice.
Next, the system will start the LEAP authentication.