User's Manual

Chapter 7 Types of Authentication and Encryption mode
48
2. Choose PEAP (MS-CHAPV2) from the drop-down menu and
click on the Configure… button.
NOTE
To enable this security, you must ensure that your PC/notebook
has already downloaded WPA-PEAP certificates; and the server
properties must already be set. Check with your system
administrator for details.
3. Enter your PEAP username and password (which are
registered with the server) in the User Name and Password
field respectively. Re-type the password in the Confirm
Password field.
4. Click on the Advanced button.
5. Leave the specification server/domain field blank to allow
the client to accept a certificate from any server that
supplies a certificate signed by the CA listed previously.
6. Click the OK button to enable the profile.