User's Manual

Chapter 7 Types of Authentication and Encryption mode
46
2. Choose PEAP-GTC from the drop-down menu and click on
the Configure… button.
NOTE
To enable this security, you must ensure that your PC/notebook
has already downloaded WPA-PEAP certificates; and the server
properties must already be set. Check with your system
administrator for details.
3. Select the appropriate certificate authority (CA) from which
the server certificate is downloaded from the drop-down list.
4. Enter your PEAP username (which is registered with the server)
in the User Name field.
5. Specify whether you are using a Token or a Static Password.
Click on the Advanced button.
Note that the Token can take the form of hardware token
device or the Secure Computing SofToken Program (version
1.3 or later) to obtain and enter a one-time password for
authentication.
6. Leave the specification server/domain field blank to allow
the client to accept a certificate from any server that
supplies a certificate signed by the CA listed previously.
7. The login name will be pre-defined in the field provided. This
login name is used for PEAP tunnel authentication. It will be
filled in automatically as PEAP-xxxxxxxxxxxx, where
xxxxxxxxxxxx is the computer’s MAC address. You may