User's Manual

Chapter 5 Wireless Adapter Utility Features

If you have created several profiles, this function allows you to establish

the priority order in which the USB adapter should try to connect to a

WLAN. If the USB adapter is unable to connect to the 1

profile, it will then

try to connect to the 2

profile and so on.

When auto profile selection is enabled,

the USB adapter scans for available

wireless networks and will connect to the

highest priority profile that matches the

networks detected.

To do so, simply click on the Add button

from the Available Profiles list. Refer to

the screen shown below.

Please note that you need AT LEAST TWO profiles to activate the Auto

Select Profiles function; and that each of your profile must connect to at

least one Network Name (SSID).

Notice that if this function is

disabled, this means that

you have not added any

profile in the Auto Selected

Profiles list.