User's Manual

FIRMWARE SPECIFICATIONS
Multiple SSID
• Supports up to 4 virtual access points (VAP) per radio, with unique BSSID. Each VAP can configure their own
security and differentiated services.
Long Range Support
• Suitable for long range wireless deployment with Proprietary Long Distance Algorithm of ACK and CTS
timeout adjustment support.
• Provides recommended values for the parameters as well as allow for manual fine-tuning for optimal
performance.
Signal Strength Indicators
• LEDs are adjustable to display 4 different level signal strength
Variable Spectrum Bandwidth Support
• Options to select operation over 5MHz,20MHz and 40MHz spectrum bandwidth
FIRMWARE INFORMATION
Operating Modes
• Access Points
• Station
• Station WDS
• Repeater WDS
• Wireless Adapter
• Station + Router
• Access Point + Router
WAN Type
• Static IP
• Dynamic IP
• PPPoE
Device Management
• HTTP / HTTPs Web Server
• SNMP V2c
• Telnet / Secure Shell (SSH)
Data Capture & Notification
• Event Login (Syslog)
• Detailed Statistics per Client
Virtual Access Point (VAP) • Up to 4 SSIDs with unique MAC Addresses (BSSID)
Advanced Features
• Built-in DHCP server
• Transmission Power Control (One dB per step)
• Closed System (Suppress SSID)
• Transmission Rate Control
• Spanning Tree Protocol
OTHER PROMINENT FEATURES DESCRIPTION
Long Range Parameter Settings Distance adjustment for long range transmission
CPE Point-to-Point (PtP) Ideal as CPE device connecting PtP with a central AP
Power with PoE
Device power from PoE through ethernet cable provides flexible
installation.
SNMP Trap
SNMP Traps enable an agent to notify the management station of
significant events by way of an unsolicited event.
Signal Strength LEDs Indicators
4 Step Progressive Bars. Each bar represents a progressive increase
in signal strength, with 4 bars representing maximum signal
DHCP Relay (Only in Gateway or Wireless
Routing Client Mode)
Allows DHCP Clients on different subnets to get IP address from
central DHCP server.
Remote Upgrade of Firmware Allows user to upgrade their firmware through Telnet/SSH
RIP 1 / 2 (Only in Gateway or Wireless
Routing Client Mode)
Routing Information Protocol Version 1 / 2
Tag and Untag VLAN/VLAN Pass-through
a. Tag VLAN Pass-through mode in AP/Transparent Client link
b. Wireless untag Vlan to Ethernet Tag Vlan mode
c. Wireless tag Vlan to Ethernet Tag Vlan mode
d.
Customizable Options
e
CUSTOMIZABLE FEATURES DESCRIPTION
Web Page Customization Customize webpage for OEM customers.
Ordering Configurations
②