Network Card User Manual

3. When you have selected an adapter, a list is displayed that shows all the devices
that are connected to the adapter:
LINK VERIFICATION 802386
SSA Link Verification for:
nunu:ssa0 04-02 IBM SSA 160 SerialRAID Adapter (
To Set or Reset Identify, move cursor onto selection, then press <Enter>.
Physical Serial# Adapter Port
A1 A2 B1 B2 Status
[TOP]
nunu:pdisk2 AC7AA09A 0 12 Good
nunu:pdisk9 AC7AA2D6 1 11 Good
nunu:pdisk8 AC7AA0BD 2 10 Good
nunu:pdisk3 AC7AA0B1 3 9 Good
ssd32:ssa0:A 4 8
nunu:pdisk6 AC7AA0B5 5 7 Good
nunu:pdisk1 AC7AA052 6 6 Good
nunu:pdisk7 AC7AA0B9 7 5 Good
nunu:pdisk5 AC7AA0B3 8 4 Good
[MORE...3]
F3=Cancel F10=Exit
The columns of information displayed on the screen have the following meanings:
v The Physical column lists the devices as they appear on the SSA loop. A device
can be either a pdisk, or an adapter.
If the device is a pdisk, it is listed as:
systemname:pdiskname (for example, nunu:pdisk3)
where:
systemname is the name of the using system to which the pdisk is
connected.
adaptername is the physical disk drive resource identifier.
If the device is an adapter, it is listed as:
systemname:adaptername:loop (for example, ssd32:ssa0:A)
where:
systemname is the name of the using system that contains the SSA adapter.
adaptername is the adapter resource identifier.
loop is the loop connection. A indicates that the adapter is connected through
ports A1 and A2. B indicates that the adapter is connected through ports B1
and B2.
v The Serial# column lists the serial numbers of the pdisks. This column is blank if
the device is an adapter.
384 User’s Guide and Maintenance Information