Network Router User Manual

Host Name
Host Name is the system wide device identifier. It is reported by SNMP Agent to authorized
management stations. Host Name will be represented in popular Router Operating Systems
registration screens and discovery tools.
Host Name: specifies the system identity.
Change button saves the Host Name if activated.
Administrative and Read-only Account
In this section you can modify the administrator password to protect your device from
unauthorized configuration. The default administrator’s password should be changed on the very
first system setup:
Administrator Username: specifies the name of the system user.
Current Password: administrator is required to enter a current password. It is required for
Password or Administrator Username change routine.
Default administrator login credentials:
• User Name: admin
• Password: password
New Password: new password used for administrator authentication should be specified.
Verify Password: new password should be re-entered to verify its accuracy.
Click Change button to save the changes.
Enable Read-Only Account
Read-Only Username
Password: new password used for read-only administrator authentication should be specified.