Network Router User Manual

SNMP Setup
Enable SNMP: Default is disabled. Check on box to enable.
Read Only Password: Password to query device.
Engine ID: Default is
Enable SNMP Trap: Default is disabled. Check on box to enable.
Trap Destination IP: Enter the IP to send the info when trap is triggered.
Community: Enter the SNMP community string.
NTP Setup
Enable NTP Client: Default is disabled. Check on box to enable.
Select Your Time Zone: Select from list the country you reside.
Custom Time Server: Default is “time.nist.gov“ Enter preferred time server domain or IP
Known Time Server: You can also select one from this list as your new time server.
Web HTTP Security
Web Server Mode: Default is HTTP. Option is HTTP and HTTPs
HTTP(s) Port: Default is 80 for HTTP and 413 for HTTPs.
Enter a new preferred port number.