Network Router User Manual

Outbound Filtering Setup
Filtering Setup: Default is disabled. Check on box to enable.
For configuration refer to Appendix section.
DNS Redirection: Default is enabled. Check on box to disable.
When enabled, router device will act as DNS proxy.
PC connected to this router device to set their TCPIP DNS IP to
router’s IP address.
PC can still setup a valid DNS IP to skip the DNS proxy handling.
Dynamic DNS Setup: Default is disabled. Check on box to enable.
Dynamic DNS let router’s WAN dynamic IP address linked and
automatically updated to domain server hosting the service each time the
IP address is changed. These ensured users on the internet can always get
access to the hosting service behind the router.
For configuration refer to Appendix section.
DNS Relay Setup: Default is disabled. Check on box to enable.
These are the primary and secondary DNS IPs device proxy service use to
resolve the domain name on behalf of the client PCs.
Primary DNS IP Address: Enter the primary DNS IP address
Secondary DNS IP Address: Enter the secondary DNS IP address