User Manual

Page 35
Setup Secured Wireless Connection
Without Using One-Touch Registration
For users using older wireless adapters without Jumpstart support, a
secondary SSID which by default has no wireless security enabled is
available for connection setup.
* Note:-
This unsecured connection is only available in factory default mode
and has not been registered a client before through the one-touch-
registration process.
If there is already a client been registered first through the one-touch-
registration process, then this unsecured connection will be disabled
automatically.
To enabled it refer to configure your router section in the later
chapters.
User can then connect to NP25G through this secondary unsecured
wireless connection.
This section will show how to setup a secured wireless connection
without using the Wireless One-Touch Registration, and setup WPA-
Personal security. For other security modes, please refer to the Set
Security Mode section.
Setup Secured Wireless Connection without using One-Touch Registration
Step 1:
In the Connect to a network
configuration page, select the
secondary SSID (compex-np25g) and
click the Connect button.