Operation Guide

Competition Electronics • 3469 Precision Drive, Rockford, IL 61109 version #2 - 9/2014
Competition Electronics, 3469 Precision Drive, Rockford, IL 61109 • version #2 - 8/2014
Continued
This indoor lighting system provides optimum lighting conditions for operating any ProChrono
chronograph.
It utilizes 72 infra-red LEDs which emit light that cannot be seen by the human eye.
Licensed under United States patent number 6,414,747.
ProChrono Chronograph Indoor Lighting System Features
• Portable and fast setup, just mount the light arcs and
connect power.
• Patented electronic design eliminates light bulbs
• Red LED “ON” indicator lights
• Works with all Prochrono models
• Dual Voltage AC adapter included
• Will operate on a 24 Volt DC source (ex. two 12 Volt
batteries wired in series.)
• Packing box is designed for storage and transport
• Individual replacement parts available
• 2 year warranty
Specifications
• Adapter input - 120/240 VAC 50/60Hz
• Light Arc Input/Adapter Output - 24 VDC 200mA
• Power Consumption - Approx. 200mA (100 mA per arc)
Setup
Remove the two arc shaped parts from the box and check the
ends to find the power receptacles. They should be installed
toward the same side of the chronograph to make a proper
connection to the adapter.
1. Mount the chronograph in the desired location and install
the guide wires.
2. Install the arc shaped light strips on top of the chronograph
guide wires.
(Note: it is important that the guide wires are not bent,
replace if necessary)
3. Plug one of the adapter outputs into each of the light arcs.
4. Connect the adapter to a 120/240volt AC outlet.
5. Note the red “ON” indicator glowing from each light arc.
6. You are ready to use the chronograph.
Setup & Operation Guide
model# CEI-4100
815.874.8001 • competitionelectronics.com
Indoor Lighting System
For use with ALL ProChrono Chronographs.