Operating Manual

Delete Shot
While positioned on a velocity, this current velocity can be deleted
by pressing the “Delete Shot” button on the ProChrono Remote.
When you press this button, the ProChrono Digital will delete the
currently displayed velocity, renumber all the shot velocities above
it in the string, and reposition the display to the last velocity. It will
redisplay the velocity number, which has been decreased by 1 due
to the deletion just performed. This operation is not reversible.
Delete String
If desired, you may delete all the velocities in the current shot
string at once by pressing the “Delete String” button on the
ProChrono Remote. This operation is not reversible.
Redisplay
With so many velocities and statistics available for display, it is
easy to forget what you are looking at. Pressing the ”Redisplay”
button on the ProChrono Digital will briefly show you either the
string and shot number, or the string and statistic ID. This makes
it a lot easier to understand how the ProChrono Digital works, and
keeps you from getting confused about what is on the display.
Print Velocities
After selecting the desired shot string, pressing the “Print Veloci-
ties” button on the ProChrono Remote will print all the shot num-
bers and velocities in the selected string to the output device.
Print Statistics
After selecting the desired shot string, pressing the “Print STATIS-
TICS” button on the ProChrono Remote will print THE LOW, HIGH
and AVERAGE velocities for the string, along with STANDARD
DEVIATION, EXTREME SPREAD, AND NUMBER OF SHOTS.
See your ProChrono Digital operator‘s manual for an explanation
of these statistics. Canceling a Command in Progress
All active and pending operations in the ProChrono Remote’s
command buffer may be cancelled by pressing the “String
Change” and “Review” buttons simultaneously.
“CACHING” KEYPRESS COMMANDS IN THE PRO