Operating Manual

POWER ON/BUSY/LOW BATTERY LED
INDICATOR
The ProChrono Remote contains a multipurpose LED to indicate
status of the unit. The status’ are as follows:
Slow Blink:
The Power Switch is on.
Fast Blink:
The Battery is Low.
Steady On:
The ProChrono Remote is busy processing a com-
mand and cannot respond immediately to a key-
press. However, your keypress will be detected and
stored for execution when the ProChrono Remote
finishes all of it’s currently pending commands.
Remember that the ProChrono Remote can store a
maximum of 10 keypresses.
CHRONO REMOTE
Some operations, such as printing statistics or shot velocities for
a shot string take a lot of time. For the added convenience of the
user, the ProChrono Remote can “cache” or store up to ten key-
press commands and execute them in order.
For example, let’s say you have several shot strings, each contain-
ing a large number of shot velocities, and you want to print them
all. Just press the String button to select the string, and press the
print velocities button. The ProChrono Remote will start sending
data to the output device. Then, select the next string right away
and press “Print Statistics.” Do this for all the strings you want to
print. The ProChrono Digital will store up to 10 keypresses and
execute them in order.
SPECIFICATIONS
Temperature Range: 32-100 degrees Fahrenheit
Size: 4-1/2x3-1/41-1/2 inches
Power Requirements: One 9-volt alkaline battery (not included)