User's Manual

- Check to make sure the batteries have enough power.
- The packaged product can be transported via common vehicles. However, it is necessary to
prevent the product from rain, damp, extrusion and mechanical collision.
2) Unpacking:
Open the individual-packed color box, take out the package with Forehead Thermometer and
remove the Forehead Thermometer from the plastic tray.
3) Battery installation or replacement
- Open the battery cover and replace the batteries. Mount the positive and negative poles of
the batteries correctly.
- Please use disposable batteries instead of rechargeable batteries, especially using the
alkaline dry batteries.
- In long period storage, it is recommended to remove the batteries to prevent battery leakage
thus damaging the product since the devices quiescent current is very low when it is not
working.
- Do not use expired batteries for the device.
The device adopts D.C. 3 V manganese or alkaline dry batteries (2 AAA batteries). When the LED
shows “ ”, it indicates that it is in low battery state and the batteries must be replaced as soon
as possible to ensure measurement accuracy. Please dispose of the replaced components (e.g. dry
batteries) and the hosts reaching the end of service life according to the local laws and regulations.
Precautions
1. When opening the battery cover to replace the batteries, pay attention to the positive and
negative poles. Dying batteries should be removed immediately. Incorrect mounting will
cause damage to the product.
Prompt: The emissivities of various materials may be different. Please refer to the material
7/21