Use Instructions

11
40℃（59.0℉-104.0℉）room for 30
minutes.
Statement
The ThermArt is to measure human body temperature by detecting natural thermal infrared
radiation from the forehead or ear. It has been clinically proven in accuracy and repeatability. Its
safety and effectiveness are both in compliance with the relevant international regulatory
requirements.
Description on the replacement cycle and method of consumables-- batteries
The detachable components of this product mainly are the batteries. Before installing the
accessories, please confirm if the specifications of accessories are consistent with the requirements
stated by supplier. Please use the models of components specified by supplier. Contact the dealer
or manufacturer if necessary.
When the low battery indication icon appears on the display , please replace with new batteries.
Calibration Mode
The ThermArt has both measurement mode and calibration mode. The measurement mode is for
the use of measuring the temperature of forehead or ear,
while the calibration mode is used for measuring the temperature of body skin or object surface.
The default factory mode is measurement mode.
The method to switch these two modes: install the batteries and long press the button at the same
time until the display is light up.
After the device is turn off, the product will restart in measurement mode.
Relevant EMC information
Cautions:
⚫ IR-EFT ThermArt meets the relevant requirements for electromagnetic compatibility in
IEC60601-1-2;
⚫ Users should install and operate the equipment according to the EMC information provided in
the accompanying documents;
⚫ Portable and mobile RF communication equipment may affect the performance of IR-EFT
Infrared Forehead and Ear Thermometer. Therefore during use, the product should be kept
away from electromagnetic interference resources, such as radio station and microwave ovens,
etc.;