User`s manual

CompeGPS Team S.L.
http://www.compegps.com
http://support.compegps.com
8.3.6.3.2 Operations with legs
If you open the contextual menu on a leg of the track in the navigation window from the „legs‟
option, you will be able to enter the following functions:
 Leg properties: You may change the colour and thickness of the leg and add a note.
 Change leg (+info)
 Delete this leg: the points of this leg will be deleted from the track, leaving an empty
space in its place.
 Save track as: You may save the track independently from the rest of the track. This
way, a new track file will be created with just this leg.
8.3.6.4 Reverse track
Any track can be reversed so the order of its points is the opposite. This can be especially useful
if you have run a distance recording the track as you go and then you wish to go back along the
same way.
To reverse the track, all you have to do is open the contextual menu on it from the track list and
select „Tools > Reverse track‟.
8.3.6.5 Advanced track tools
From the track contextual menu in the tracks list, you can enter the „Tools‟ submenu, which
includes highly interesting secondary tools for concrete needs:
 Calculate the altitude of the ground of each point (Import altitudes): If you have 3D
relief (CDEM) loaded, TwoNav may assign each point of the track its altitude considering
the information of the relief.
 Delete stopped points from the beginning and the end (Del.strt/end points): The
track omits the repetitive points from the beginning and the end, where you were stopped
before and after making the track.