User`s manual

CompeGPS Team S.L.
http://www.compegps.com
http://support.compegps.com
If after selecting a waypoint you click briefly on the map, a new waypoint will be created just after
the selected one.
8.2.5.2.3.2 Introduce coordinates
In order to modify the coordinates of a waypoint, all you have to do is enter its properties window
and introduce the new value, checking that the datum and the projection are correct.
8.2.5.2.4 Change the order of the waypoints in the route
To move the added waypoint and approach it or move it further from the beginning of the route,
make a long click on the name of the waypoint and select the option „Move Up‟ or „Move Down‟
from the Contextual Menu.
8.2.5.2.5 Invert the route
To apply on a route the contrary sense to the one it originally had, open the contextual menu of
the route from the routes list and select Tools > Invert the route. This way the sense of the
route will be changed and it will begin at the end.
8.2.5.2.6 Convert a route into a track
If you wish to change a route into a track format, open the contextual menu of the route from the
routes list and select Tools > Change into a track.
8.2.5.3 Save
8.2.5.3.1 Save route
If you are satisfied with the work on your routes, you may save it by selecting the option Save
route from the contextual menu of the route on the map or routes list.
The modifications that you may have made will be saved directly overwriting the old file.
8.2.5.3.2 Save route as
If you wish to save the route under a different name, location (folder) or (*.RTE or *.GPX) formats,
you may select the option Save route As from the contextual menu of the route contained in the
routes list.