User`s manual
CompeGPS Team S.L.
http://www.compegps.com
http://support.compegps.com
If there are no waypoints files loaded, TwoNav will create one with a default name (new WPT),
which you will be able to modify o the waypoints list.
These functions can be added to tool bar by means of the tool manager.
„Mark and edit WPT‟ can be also accessed from „Main menu > Data > Mark and edit WPT‟
8.1.5.1.2 Create a waypoint on the map
Open the contextual menu on the point of the map where you wish to generate the waypoint and
select „New > Waypoint here‟.
A waypoint is created inside the waypoints folder first opened * (the first on the „data‟ list) and the
properties window will open so you can modify any of them.
8.1.5.1.3 Create a waypoint from the waypoints list
When selecting a waypoints folder from the waypoints list, you will be able to enter the „New
waypoint‟ functions (from the contextual menu or directly by means of the list buttons). When
selecting it you will be able to create the Waypoint in 5 different ways:
Present position: GPS position in which you are when creating it.
Present destination: final point of your present navigation.
Address: enter the address using the Vmap data base.
By map: it will open a window from which you will be able to select on the map the exact
point where you want to create the waypoint.
Waypoint: in this file you can add a waypoint from a different waypoints file. All you have
to do is select the waypoint inside the concrete waypoints file.
8.1.5.2 Edit waypoints
8.1.5.2.1 Modify properties
Once a waypoint is created you may change several parameters from the waypoints properties
window.
8.1.5.2.2 Delete Waypoint
You may delete a specific waypoint from its contextual menu, both from the map as from the
waypoints list.
8.1.5.3 Save
8.1.5.3.1 Save waypoints
If you are satisfied of your operations on your waypoints, you may save them by selecting the
option Save waypoints from the waypoint or waypoints file contextual menu of the map or
waypoints list.
The changes you may have made will be saved directly overwriting the old file.
Note: the „create waypoint on present position‟ function automatically saves the waypoint file
where the present waypoint has been added as a safety measure in order not to lose the
waypoints quickly created with this function.