User`s manual

CompeGPS Team S.L.
http://www.compegps.com
http://support.compegps.com
The option „At night‟ makes it automatic but only for night and not for tunnels.
If „automatic‟ is off, you will be able to select manually if you wish to have the night mode on or
not.
Note: TwoNav always keeps the time updated as long as the device receives the GPS signal.
Usually, inside buildings, there is no reception of satellite signals and so, automatic „Night View‟
may be affected.
4.6.6 Re-centring
„Main Menu > Settings > Display > Re-center‟
While navigating you may move the map to see other parts of the grounds, losing the reference
of your present position. In these cases, a re-centring button will be displayed on the
screen.
TwoNav contains an automatic re-centring function, so if the map is not moved manually for 10
seconds, it will centre back to its present position.
The time for re-centring may be modified and even turn it off, leaving the option of pressing the
re-centring button to go back to your position.
Re-centring can be performed with a smooth movement or instantaneously. Enable or disable
„smooth re-centre‟ option as you prefer.
Note: If the function „auto zoom‟ is activated, when pressing re-centring, the zoom suitable for
your present speed will also return, losing then the variation of the zoom level you may have
done.
4.6.7 Data Fields
„Main Menu > Settings > Display > Data Fields‟
Once inside the editor, take the following steps:
1. Press on the „Type‟ pull-down menu to
choose the section to be set.
2. Select the space you wish to edit (bar,
page, compass o graph).
Each space includes information related
to its title. This way, on the compass
page, we can find all the data concerning
the bearing and on the graph page, all the
data concerning altitude (slope, altitude,
climb to destination...) among others.
The data page manages all generic data,
such as time, sunset, chronometer, etc.