User`s manual

CompeGPS Team S.L.
http://www.compegps.com
http://support.compegps.com
Data fields are configurable to have a different set for On-Road or Off-Road. Changes made in
one mode will not affect the other.
4.3.1 Selection of the data fields
You can select data fields in two ways:
 Change just one field: By opening the contextual menu in any field (long click) and
selecting „Change this field‟.
This will let you choose directly the data to display in that field.
 Data field manager: From „Main Menu > Settings > Display > Data fields‟. Check the
section „Fields‟ for a more detailed description of the functionalities of this editor.
You can find the list of the available fields in appendix 1
4.3.2 Special Functions
When opening a contextual menu on a data field, you will find the available functions associated
to this field.
The options are not the same in all fields. Here follows a description of the ones you may find:
1. Data Fields: Enters the editor of the available fields.
2. Don‟t show this field: Eliminates a datum immediately.
3. Program alarm: Define a higher or lower limit as the type of signal (visual or audible) to
let you know when exiting this range. In case an audible signal is added, you must
choose the sound file you wish to be reproduced.
4. Reset: Typically, you may find it in fields such as the travelled distance meter
(odometer) o chronometer. They reset the counter to 0.