User manual

http://www.CompeGPS.com http://Support.CompeGPS.com 89
 Change leg: Creates a new leg of the same track starting in the current
position.
 Close edition: While editing any element, if pressed, the edition will be
finished.
 Close tool mode: Button to easily close the tool bar mode
 FF to next: Jump to next event of the itinerary.
 FF: Accelerate the itinerary. Press it again to apply normal speed.
 Full screen: Most of user interface elements will be hidden to get a wider
view of the map.
 Less detailed map: TwoNav will try to load a map of lower resolution than
the currently loaded.
 Man over board: If some falls into the water, route will be automatically
calculated to that point.
 Mark and edit waypoint: Create new waypoint in current position and
access to its properties, so that you can customize them.
 Mark roadbook point: Create new roadbook waypoint in current position
with default name and icon.
 Mark waypoint: Create new waypoint in current position with default
name and icon.
 More detailed map: TwoNav will try to load a map of higher resolution
than the currently loaded.
 Mute: Sound level is totally reduced.
 Navigate: Choose the destination that you are about to navigate.
 New waypoint: Choose where to create new waypoint and access to its
properties, so that you can customize them.
 Next waypoint: When navigating, switch to the next waypoint (only visible
when navigating a route/track which contains waypoints).
 Open: Open any file.
 Orient map: Track up/North up