User manual

http://www.CompeGPS.com http://Support.CompeGPS.com 86
 Leg accumulated descent: Total amount descended from the begining of
the current leg section up to the current position.
 Magnetic bearing: Course followed according to the inner device
compass.
 Maximum altitude: Reached during your itinerary.
 Maximum power: Maximum power achieved from the begining of
itinerary.
 Maximum speed: Maximum speed in current flight.
 Mean moving pace: Average of all pace values above the minimum
speed movement.
 Mean moving speed: Average of all speeds values above the minimum
speed movement.
 Mean pace: Average of all pace values.
 Mean power: Average of all power values.
 Mean speed: Average of all speeds values.
 Moving pace: Average of all pace values avoiding stopped points.
 Next radar speed: Displays maximum speed allowed by the next radar.
 Next slope: Slope till the distance set at 'Next slope distance'.
 Next waypoint name: Name of the following waypoint.
 Normal acceleration: Perpendicular to movement in circular movements.
 Number of points: Track points saved up to current position.
 Partial CO2 emission: CO2 emission from the beginning of itinerary.
Value reseted every time TwoNav is turned off.
 Partial energy: Partial odometer energy.
 Partial mean speed: Average of all speeds values from the beginning of
itinerary up to this moment.
 PDOP: Position Dilution Of Precision (estimated current position accuracy
of the GPS).