User manual

http://www.CompeGPS.com http://Support.CompeGPS.com 8

2.2 Application status

From ‘Main menu > Status’ you can check the status of general functions of

TwoNav application.

 Triplog (recording of itinerary): ‘Triplog’ is the command allowing you to

manage the recording of your itinerary, your itinerary will be recorded

when ‘Triplog’ is started.

 Reception and position of satellites: Check the number of satellites

available as well as their distribution orbiting over the vault and their

coverage.

By default, when TwoNav is launched, it will try to connect to available

satellites so that you can start working with GPS function. If GPS is

disconnected, TwoNav will not receive any position signal and many

application functions will stop working.

Possible states for GPS function:

Disconnected

Connected (without position)

Connecting

Connected (with position)

Error (not found)

Connected (with position) and

recording track

Simulating

Connect/Disconnect GPS function:

Press the central button to switch on/off the GPS of TwoNav.

Note: TwoNav will attempt to fix your current position, but if you are

somewhere without GPS coverage (for example: inside a building), GPS

status will turn into ‘Connected (without position)’.