User manual

http://www.CompeGPS.com http://Support.CompeGPS.com 72
folder. This is a security system in order to avoid losing tracks in case you
forget to start ‘Triplog’ function.
 Recovery time: When TwoNav is suddenly switch off, if you turn the
device on during the established interval, the previous data is recovered
and displayed again.
8.9.2 Display
 Show current ‘Tracklog’ on map: If enabled, the track that is being
recorded will be shown on the map window.
 Show current ‘Tracklog’ in list: If enabled, the track that is being
recorded will be listed in track list marked with ‘*’ (‘Main menu > Data >
Tracks’).
 Track color: Set the colour for the generated track.
 Thickness: Set the thickness for the generated track.
 Points shown without reduction: Recorded track is visible on map
window, but only the latest points of the track are shown as they are
recorded (with no reduction of points). Set how long this section is.
 Reduction for previous points: It is highly recommended to make a
reduction of the rest of the displayed track as well. Set a reduction to
display the previous points of the recorded track (all except the latest
points).
Important: These reductions does not affect the resulting track file (it will
keep all points). These functions only concern the track being displayed on
screen in order to save memory.
8.9.3 Synchronization with navigation
 Select navigation when start recording 'Triplog': When 'Triplog > Start!'
is pressed, destination can be chosen from several options.
 Force recording after navigation selection: When a new navigation is
started, the recording of the track is also started ('Triplog'), no need to
press 'Triplog > Record' each time.
 Stop navigation when stop recording 'Triplog': When the recording of
the 'Triplog' is stopped, the current navigation is also stopped.