User manual

http://www.CompeGPS.com http://Support.CompeGPS.com 71
 Cruise speed: Expected mean speed according to the selected vehicle.
Default ‘Cruise speed’ value for each vehicle:
 Pedestrian: 3 km/h
 Bike: 15 km/h
 Car: 80 km/h
 Boat: 20 km/h
Note: If no 'Routing speed' or 'Track time' are available, ‘Mean Speed’ will be
used to calculate the estimated time of arrival.
8.8.4 Slope
In order to get slope data, TwoNav requires you to set the distance values to
calculate the following data:
 Slope calculation distance: Used to calculate current ‘Slope’ data field.
 Next slope distance: Used to calculate ‘Next slope’ data field.
8.9 Tracklog
Set the type of track recording that will be generated for your navigation
according to your preferences:
 Start ‘Triplog’ at power on: TwoNav will automatically record by default
all your movements when you start using the application. This function is
very useful for users who forget to record the itinerary.
8.9.1 File
 File format: Set the track format of the resulting file.
 Recording interval:
 By time: Set the time to create every new track point.
 By distance: Set the distance to create every new track point.
 Automatic: Track points will be automatically recorded when
changing course and depending on the speed.
 Weak signal filter: If GPS signal is not reliable, points are ignored while
recording track. This prevents the recording of non reliable data.
 Save discard ‘Tracklog’ in trash: If enabled, when options 'Pause' or
'Finish trip' are pressed, your following movements will be automatically
recorded as backup track copy inside ‘TwoNavData/Data/Tracklog/Trash’