User manual

http://www.CompeGPS.com http://Support.CompeGPS.com 68
8.5.6 Speed limit
 Set speed limit: Speed limit of each particular road will be considered by
default, but you can set a fix speed limit to warn you disregards the limit of
each road.
 Speed alarm: When driving over the established speed limit a warning
display will be shown. Choose among different alarm displays.
 Speed to block interface: User interface will be blocked when exceeding
this value. You will not be able to manipulate the application. Configure
this function according to laws of each country.
8.5.7 Depth
Before you enable/disable depth alarm, you must set the default value for
maximum draft (‘Draft’: only for ‘Boat’, depth to which a vessel is immersed):
 Current
 Next waypoint
 Prow line
Fix also a warning sound and a repetition interval.
8.6 Training
Fix the training tools of TwoNav to your own needs:
 Legs type: Detailed analysis of the track by ‘virtually’ dividing it in different
legs (portions of the track) either by distance, time or aerial conditions.
Analyse the legs of the track from its propierties, click on a leg to get more
information about it.
 Energy calculation method: According to your preferences.
 Gender/Weight/Age: Information used to calculate other data.
 Maximum heart beat: Information used to calculate other data. If not
enabled, the maximum heart rate is calculated using Tanaka formula.
8.7 Vehicle
Before you start navigating, it is very important to set your vehicle so the system
configuration and calculations will be adapted according to the selected vehicle:
 Pedestrian
 Bike
 Car
 Boat