User manual

http://www.CompeGPS.com http://Support.CompeGPS.com 53
use that remote map without internet connection. TwoNav application will keep
the map area that you have selected in the device memory.
Set the maximum memory that you want to use to save map areas in cache.
8.1.4 Units
Set the type of measurement units to use in TwoNav.
8.1.5 Audio
 Mute: Enable/Disable the general audio level of TwoNav application.
 General: Manage the general audio level of TwoNav application.
 Alarm: Regulate the audio level for alarms and radar warnings.
 Clicks: Regulate the audio level for buttons pulses.
 Voice: Regulate the audio level for voices indicating manoeuvres.
8.1.6 Folders
In order to show your elements (maps/waypoints/routes/tracks) in data lists
(‘Main menu > Data’), they have to be inside the right folder of the device. If not,
they will not be accessible from data lists.
 Default folder for maps: ‘TwoNavData/Maps’
 Default folder for your recorded tracks: ‘TwoNavData/Data/Tracklog’
 Default folder for tracks/waypoints/routes: ‘TwoNavData/Data’
You can add more than one folder for each type of data. Then data list will also
contain in a single list all data from the different folders that you have set.
Note: If there is any other folder inside the one you
have selected, it will also be shown in the data list. For
example, if ‘Pyrenees routes’ folder inside
‘TwoNavData/Data’, ‘Pyrenees routes’ will also be
shown in the data list.