User manual

http://www.CompeGPS.com http://Support.CompeGPS.com 41
6.3.3.5 Delete aberrant points
Points deviating excessively from the track will be considered errors, and so
deleted.
6.3.3.6 Invert track
In order to display a track in the opposite sense to the default one (the begining
at the end and vicecersa), open the contextual menu of the track and select
‘Tools > Reverse the track’.
6.3.3.7 Convert a track into a route
In order to change a track into a route, open the contextual menu of the track and
press ‘Tools > Change into a route’.
6.3.3.8 Track legs
6.3.3.8.1 Create legs
 Create separated legs on an existing track: You may split the track in
several legs by opening the contextual menu on the point that divides the
two selected legs ‘Legs > Change leg here’.
At this moment, the leg closer to the end of the track will change colour to
highlight the difference between the two legs. The initial leg will remain the
original colour of the track.
 Create new legs on the present track: If during the recording of the
present track you activate a pause from the ‘Status’ window, when starting
recording again, the new points will keep being recorded in the same file
as before the pause, but a new leg with the new points will be generated
automatically. This way, you will be able to make out easily the parts of the
present leg and apply independent modifications on them.
If there is a distance from the moment you paused the recording of the
track until you activated it again, the empty space passed in this time will
be visible on its display.
6.3.3.8.2 Operations with legs
If you open the contextual menu on a track leg in the navigation window from
‘Legs’ option, you will be able to check the properties of the leg, analyse it,
change into a new leg…