User manual

http://www.CompeGPS.com http://Support.CompeGPS.com 40
6.3.2 Routes
6.3.2.1 Modifiy for all waypoints
If any of these properties is modified, it will be applied for all waypoints at the
same time.
6.3.2.2 Change the order of the waypoints in a route
In order to change the order of the waypoints of a route, open the contextual
menu on the waypoint that you want to move and select ‘Move up’ or ‘Move
down’.
6.3.2.3 Invert a route
In order to display a route in the opposite sense to the default one (the begining
at the end and vicecersa), open the contextual menu of the route and select
‘Tools > Invert the route’.
6.3.2.4 Convert a route into a track
In order to change a route into a track, open the contextual menu of the route
and press ‘Tools > Change into a track’.
6.3.3 Tracks
6.3.3.1 Import altitudes
If you have a 3D relief map loaded (*.CDEM file), TwoNav will assign to each
point of the track its altitude considering the information of the loaded relief map.
6.3.3.2 Delete stopped points start/end
Track will omit the repetitive points from the beginning and the end where you
stopped before and after making the track.
6.3.3.3 Reduce the number of points
Track will be drawn by keeping the shape of the original track but according to
the number of points that you introduce.
6.3.3.4 Assign time/speed
Determine a time for departure and a constant speed so that TwoNav will
calculate the estimated time of arrival for each point in the track.