User manual

http://www.CompeGPS.com http://Support.CompeGPS.com 35
6.2.1.2 From data lists
6.2.1.2.1 Waypoints lists
From the list of waypoints (‘Main menu > Data > Waypoints’) press ‘Create new
waypoint’ and select among several ways to set the position for the newly
created waypoint.
 Address: Enter the address using the database of a vectorial map.
 Bearing: Destination point will be determined introducing bearing and
distance values.
 By map: Map window will be opened, select the exact location where you
want to create the waypoint.
 Coordinates: Type the exact coordinates of the newly created waypoint.
 Favourites: Select any of your waypoints categorized as favourites.
 Present destination: Final point of your present navigation.
 Present position: GPS position in which you are when creating the new
waypoint.
 Waypoint: Add a waypoint from a waypoints file. All you have to do is
select the waypoint inside the concrete waypoints.
6.2.1.2.2 Routes lists
From the list of routes (‘Main menu > Data > Routes’) press ‘Create new route’.
The new route file will contain no waypoints, you will have to add them by
pressing ‘Create new waypoint’. Select among several ways to set the position
for the newly created waypoints (check other chapters in order to create
individual waypoints).
6.2.2 Move position of waypoints
1. Open the contextual menu on the waypoint and select ‘Edit’.