User`s manual

UNIX Configuration 7-9
7.3.3 Setting Up an AIX 4.0 System
Use the following procedures to install a EcoLAN 3000E in an AIX 4.0 system:
1. Run SMIT Printer.
2. Select Print Spooling.
3. Select Add a Print Queue
4. Select Remote.
5. Use Standard Processing.
6. Assign a queue name.
7. Use the host address of the EcoLAN 3000E for the Remote System.
8. Use PORT1 for the queue on the remote system.
9. Add a description (optional).
10. Press e to generate.
Installation is complete. Test your printer by executing the following command:
lp -d<queue_name> <file_name>
7.3.4 Setting Up an HP/UX Remote Printer to Use lpd
Set up a remote printer on the host that sends jobs to a EcoLAN 3000E using the
EcoLAN 3000E lpd. To do this:
1. At the prompt, type: sam
2. When a window appears, select Printer/Plotter Manager.
3. When the menu appears, select List printer and plotters.
4. When a list appears, select Actions in the title bar.
5. From the pull-down menu, select Add Remote Printer.
6. When a window appears, add values to configure EcoLAN 3000E. See the follow-
ing example.
Input Requested Example
Description of Inputted Data
Printer Name myprinter name to be used in lp command
Remote System Name fastprint
EcoLAN 3000E hostname as in /etc/hosts
Remote printer Name PORT1 lpd queue name
Cover-Preface.book Page 9 Wednesday, May 12, 1999 10:48 PM