User`s manual

NetWare Configuration 4-21
4.4 EcoLAN 3000E Configuration
The MAP utility or an IP web browser must be used to define the context of the
3000E. It is also used to change the Print Server name, set in a password, modify scan
and frame search parameters, and set in bindery-mode specific values.
Use the MAP utility or IP Web Browser (refer to Chapter 3) to access the Setup pages
of the EcoLAN 3000E. Once you have accessed the Network Administration pages or
the Main Menu, do the following:
1. Select Setup NetWare under Protocols.
2. Click on Enable NetWare. If it is not selected, the NetWare protocols will not
come up, the EcoLAN 3000E will not appear as an advertised device, and the NIC
will not be accessible using IPX SNMP.
3. The default name for the NetWare Print Server is KYO_123456, where 123456 is
the serial number of the EcoLAN 3000E. This is also the name of the printer in
peer-to-peer mode. If you want to change the default Print Server name, type this
name in the Print Server Name space. This name must match the Print Server
name previously defined in the PCONSOLE or NWADMIN setup.
4. If you want the EcoLAN 3000E to login with a password, this password may be
entered in the Print Server Password field, and again in the Password Retype
field. If a password is used, this password must be the same password for all
bindery-based and NDS-based Print Server entries.
5. Enter the name of a preferred bindery-based file server in the Preferred Bindery
File Server field. The Preferred Bindery File Server entry is significant only for
bindery or bindery emulation based operations. Refer to 4.1.9 Preferred File
Servers for the significance of a Preferred File Server. The Print Server must be
configured on the preferred file server. Incorrect setup of a Preferred File Server
can interfere with NetWare printing. For NDS printing leave Preferred Bindery
File Server blank.
6. If the Print Server is to be operated under Novell Directory Services, type in a
Preferred NDS Context entry. Be sure to give the whole context, whether typeful
or typeless, and do not begin your context path with a leading period (.). A typeful
context name example is:
ou=sales.o=acme
A typeless context name example is:
sales.acme
Cover-Preface.book Page 21 Wednesday, May 12, 1999 10:48 PM