User`s manual

NetWare Configuration 4-5
4.1.5 Assign Print Queues to the Printer
When you assign queues to the defined printer, you authorize the print server to
service these queues.
Note: Do not assign the same queue to two different print servers. If a queue is assigned
to multiple print servers, print jobs may not go to the intended printer.
1. Choose Queues Serviced By Printer from the Print Server Configuration menu.
2. Select the printer name from the list of defined printers.
3. Press INS to display the Available Queues list for the printer.
4. Select the queue you want and then assign a priority level from 1 to 10. It is
recommended that you accept the default priority level. Press ENTER. The queue
appears on the list for the printer.
Press the INS key again to assign additional queues.
5. When you finish assigning queues, press the ESC key and then save your
changes. Continue to press the ESC key to return to the Print Server
Configuration menu. If you want to set Notify options, go to Section. 4.1.6. If you
are finished, continue to press the ESC key and then save your changes.
Cover-Preface.book Page 5 Wednesday, May 12, 1999 10:48 PM