User`s manual

NetWare Configuration 4-4
4.1.4 Configure the Print Server
Use the following procedures to configure the Print Server’s function:
1. Choose the print server name from the Print Servers list and press ENTER.
The Print Server Information menu appears.
2. Choose Print Server Configuration from the menu and press ENTER.
3. Choose Printer Configuration from the menu and press ENTER. The
Configured Printers menu appears. Since this is a new Print Server entry, all
printers are labeled "Not Installed".
4. Choose the printer and press ENTER. The Printer 0 Configuration screen
appears with a title of Printer 0.
5. If you choose to, change default in the Name field on this form to something that
helps you identify the printer, for example, LASER_PRINTER. The print server
uses this name in its message back to the users on the Notify list. Select Name,
enter a name, and then press ENTER.
6. Select Type and press ENTER. A list of printer types is displayed. Choose
Remote
Other/Unknown and press ENTER. This creates default entries in the other
fields. These defaults are usually optimal, so do not change them without specific
knowledge of the effects.
7. Press the ESC key. At the prompt, choose to save your changes.
8. Press the ESC key to return to the Print Server Configuration menu.
Cover-Preface.book Page 4 Wednesday, May 12, 1999 10:48 PM