User`s manual

Operation and Troubleshooting 9-2
9.2 EcoLAN 3000E Network Status Page
The status page may be printed by pressing the Status key on the printer front panel.
This will print a printer status page followed by the EcoLAN 3000E Network status
page. Depending upon the size of the network and other factors such as which
protocols are enabled on the 3000E, it may take from 30 seconds to several minutes
before the status page is printed. The status page may be set to be printed
automatically at power-up using MAP or a web browser.
It is strongly recommended that you review and save the 3000E status page after
installation or any time the setup has been changed.
Amber LED blinks
short for 10
seconds. Amber
LED goes off and
the Green LED
blinks
continuously.
Performing flash
memory self-tests
Did not pass the checksum
test. Unit automatically goes
into download mode and
awaits flash update.
Error
Green LED blinks
slowly.
Awaiting print jobs
sometime after power-on
completes.
Some printer interface error. Error
Green LED blinks
rapidly.
Awaiting print jobs. Has lost its NetWare
connection to file server.
Error
Green LED
alternately blinks
with amber
indicator.
Finished with power-on
sequence.
Has been reset to factory
defaults. Power off and move
jumper OP2 to CUST
position.
Error
Cover-Preface.book Page 2 Wednesday, May 12, 1999 10:48 PM