User`s manual

Additional Printing & Configuration Options 8-10
8.4.4 Enable/Disable Network Protocols
To enable network protocols, at the Main menu type 3 and press ENTER.
You are given the choice of disabling either NetWare or AppleTalk since both
network OS’s are enabled by default. For example, to disable Appletalk, type 2 and
press ENTER.
8.4.5 Restore Factory Defaults
When it is necessary to restore factory defaults on your print server, choose 4 on the
Main Menu and press ENTER. All NVRAM stored parameters will be returned to
their factory default values. The factory default values will not take effect until the
Telnet program is exited, or the unit is powered cycled.
8.4.6 Change Password
When you want to establish a new password, enter 5 from the Main menu. Type up to
eight characters after the New Password query and press ENTER. Retype the same
characters at the Retype New Password query and press ENTER. Use the Save
Changes and Exit option. Once you have established your password using Change
Password, the password sysadm will be rejected.
Note: There is a single maintenance access password, sysadm, to the EcoLAN 3000E.
This password is used for both Telnet and HTML maintenance programs. This
password may be changed from Telnet or from HTML (accessed either via MAP
or Web Browser utility.
Cover-Preface.book Page 10 Wednesday, May 12, 1999 10:48 PM