Specifications

IPmux TDMoIP Gateways
T
T
el (toll free): 888-785-7393
el (toll free): 888-785-7393
!
!
Fax: [phone]
Fax: [phone]
!
!
[e-mail]
[e-mail]
!
!
www
www
.pulsewan.com
.pulsewan.com
www
www
.pulsewan.com
.pulsewan.com
IPmux provides a compact, minimal configuration
solution for virtual E1/T1 and ISDN BRI point-to-
point applications, transporting these services over
IP and Ethernet based networks. IPmux takes data
streams from up to 16 E1/T1 or BRI (IPmux-1E)
ports and converts them to packets for transmission
over the network. The addressing scheme of these
frames is IP. These frames are transmitted via the
IPmux 10/100BaseT port to the network. A second
IPmux at the remote location converts the IP packets
back to E1/T1 traffic. The overall effect of the IPmux
is to allow transparent E1/T1/BRI connectivity over
the new generation of switch based packet
networks, both in the carrier and the corporate
environments.
A standard 10/100BaseT half/full duplex port with
auto-negotiation support provides the uplink to the
network. Either one or four, eight, twelve or sixteen
standard E1/T1 ports provide connectivity to any
standard E1/T1 user device. The IPmux conforms
with AT&T TR-62411, ITU-T G.703, G.706, G.732,
G.823 and ANSI T1.403 standards.
IPmux can achieve end to end (E1/T1 port to E1/T1
port) delay as low as 1 ms, using high performance
buffering and forwarding techniques. It also
supports synchronization between the two E1/T1
devices, using either the clock of the E1/T1 network,
or using its internal adaptive mode.
!
Transports E1/T1 TDM services and circuits
over IP networks
!
Totally transparent to all signaling protocols
running over E1/T1
!
Multiplexes up to 16 E1/T1 circuits over an
IP transport layer
!
10/100BaseT uplink to network
!
End to end delay starting from 1 ms
!
Supports transport of both transparent E1
and fractional E1/T1
!
Support for adaptive clock regeneration
mode
!
Supports packet delay variation up to 32 ms
for E1 and 24 ms for T1
!
Enables point to point applications
!
Supports IP level priority (TOS)
!
Supports Mac level priority
!
IEEE 802.1-p&q
!
Conforms to G.703, G.823, G.706, ANSI,
T1.403
!
Dual redundant power supply
!
Compact, 1U and 2U high, 19" enclosure
T1/E1
T1/E1
Over IP!
Over IP!
The IPmux is available with the following
ordering options. Please contact your
nearest Pulse office for ordering
assistance.
!
1, 4, 8, 12 or 16 T1/E1 Ports and DS-3
!
AC (100-240 VAC) or DC (-48 VDC) Power
!
Redundant Power Supply (optional)
IPmux-1/1E
IPmux-16
IPmux-8