Specifications

Digit
Digit
al Patching and Switching
al Patching and Switching
42
42
T
T
el (toll free): 888-785-7393
el (toll free): 888-785-7393
!
!
Fax: [phone]
Fax: [phone]
!
!
[e-mail]
[e-mail]
!
!
www
www
.pulsewan.com
.pulsewan.com
Digital Patch Panels
Pulse offers a complete line of digital switching and patching products.
Patching solutions providing non-intrusive monitoring and patching into
data circuits are available for all popular serial interfaces, with speeds up
to 10Mbps supported.
These systems provide both an efficient and a reliable means of access-
ing data circuits for network reconfiguration, service restoral, non-interrup-
tive line monitoring and troubleshooting.
Standard Patch systems are rack mountable. Each rack has 17 slots for
Patch, Access, and Test Modules. Each Patch Module has three front-
panel patch cavities (COMP, MODEM, and MON) for access to the circuit
and two rear connectors (DTE and DCE) for attachment to communication
equipment.
When no patch cords are inserted, the circuit between the DTE and DCE
is normal through. Inserting a patch cord in the COMP cavity breaks all 18
(V.35) or all 24 leads of the circuit and provides access to these leads
toward the DTE. In the MODEM cavity, the circuit is accessed toward the
DCE. The MON cavity provides access without breaking the circuit.
Equipment Order Number
RS-232 Patch System Please Call
RS-530 Patch System
RS-449 Patch System
V.35 Patch System
X.21 Patch System
(X.21 also supports T1/E1, DB15 Interface)
RJ-45 8-Wire Patch System
RJ-45 4-Wire Patch System
RJ-45 8-Wire Switch
RS-232 SwitchPatch System
V.35 SwitchPatch System
RS-530 SwitchPatch System
T1/E1 Matrix Switch
V.35 Matrix Switch
RS-232 Matrix Switch
RS-530 Matrix Switch
Due to the complexity of these products and the
many options, please call or email your nearest Pulse
office for ordering assistance.
Switch and Switch/Patch systems are also available to provide A/B
circuit switching and a combination of A/B circuit switching and patching.
Matrix Switching systems provide maximum flexibility for real time circuit
reconfiguration and monitoring. Systems are available for T1, E1, V.35,
RS-530, RS-449 and RS-232. Matrix Switching products allow the user to
switch any port to any port (full non-blocking matrix). Systems are
computer controlled and can be accessed remotely to provide off site
access to circuit maintenance and reconfiguration.
Spectron Compatible Systems and Cables
Still Available!