Specifications

Interface and Signaling Conversion
Interface and Signaling Conversion
40
40
T
T
el (toll free): 888-785-7393
el (toll free): 888-785-7393
!
!
Fax: [phone]
Fax: [phone]
!
!
[e-mail]
[e-mail]
!
!
www
www
.pulsewan.com
.pulsewan.com
SignalPath™ 230 Protocol Signaling Gateway
The SignalPath 230 (SP230) is an advanced signaling protocol converter
designed to facilitate interoperability between incompatible communication
networks. The SP230 enables a seamless interface between in-band and
out-of-band networks, and between out-of-band networks and other out-of-
band networks. Different types of communication protocols, both in-band
and out-of-band, exist globally. One country could have up to six or seven
different protocols simultaneously in use within its networks. The SP230
breaks down the communication barriers presented by these different
protocols and enables the flow of information across any network.
Not only can you increase your potential to connect to a larger portion of the
world market, but you can also eliminate charges you may be currently
paying to one or more companies for network connections. This means more
revenue in your corporate pocket.
The SP230 has a modular design, with a capacity of up to 52 E1 or T1
interfaces, allowing users to scale the product to fit small or large applica-
tions while incurring a low upfront investment. In-band protocols supported
are R1, R2, and DTMF. Out-of-band protocols supported are SS7-ANSI, C7-
ITU-T, and NI2 and ETSI PRI-ISDN. Custom variants of both in-band and
out-of-band protocols are available.
The SP201 is a fixed configuration version of the SP230. It supports a
maximum of four T1/E1 trunks (8 ports) with a single signaling link.
SignalPath 201
SignalPath 230
Equipment Order Number
SignalPath 230
SignalPath 201
Due to the complexity of this product and the
many options, please call or email your nearest
Pulse office for ordering assistance.